|MECHANICAL PROPERTIES||Value||Unit||Testing Method|
|Tensile Strength (Moulding Direction)||13.8-34||MPa||ASTM D638|
|Elongation at Break (Moulding Direction)||150(min)||%||ASTM D638|
|Specific gravity||2.14-2.25||—||ASTM D792|
|Hardness||50-65||Shore D||ASTM D2240|
|Flexural Yield Strength@0.2% Offset,23℃||—||MPa||ASTM D790|
|Flexural Modulus @23℃||350～550||MPa||ASTM D790|
|Dimensional stability(Length) 290℃ 2h||1.5(max)||%||ASTM D1710-08|
|Dimensional stability(Diameter) 290℃ 2h||0.5(max)||%||ASTM D1710-08|
|Compressive Strength @0.2% Offset,23℃||7.7～11.8||MPa||ASTM D695|
|ELECTRICAL PROPERTIES||Value||Unit||Testing Method|
|Dielectric Strenght @Air (Tape)||27.5||KV/mm||ASTM D149|
|Dielectric Constant||1.92～2.1||—||ASTM D150|
|Dissipation Factor@60HZ||<0.0002||(60HZ)||ASTM D150|
|Resistivity @Surface||>1017||Ω||ASTM D257|
|THERMAL PROPERTIES||Value||Unit||Testing Method|
|Point of Fusion DSC||327±10||℃||ASTM D4591|
|Thermal Conductivity @Moulding Direction(MD)||W/m.k||ASTM C177|
|WEAR PROPERTIES||Value||Unit||Testing Method|
|Coefficient of Dynamic Friction||μk||ASTM D1894|
1, Low coefficient of friction;
2, Flexibility at low temperatures and thermal stability at high temperatures,Broad working temperature range (500°F/260°C – -292°F/-180°C);
3, Chemically resistant – all normal solvents, acids, and bases;
4, Low dielectric constant and low dissipation factor;
6, Non-stick, Easy to clean;
7, Long-term weathering;
8, High arc resistance, surface and volume resistivities
3 Why choosing us?
Quick response.we can send our best offer with all the details in 1 working day specicial processing we are equipped with full series of advanced machining equipment, experienced technology team, we are able to solve the complex processing problems for you. Cost time control no matter it is sample or mass production, we have the corresponding ways to minimize the cost, to expedite the delivery quality control quality is our life. Our strict quality control system can meet the different requirement in the industry like medical, automobile, telecommunication, sealing. Etc our raw material including: ptfe peek tpx pei(ultem) pet-p pa66 pa6 pctfe pps ppo pom pfa pvdf pai pi(vespel sp-1). Etc
Q: Are you trading company or manufacturer?
A: We are professional PTFE product manufacturer with ISO9001, ISO14001 certificated, and all material are RoHS, Food grade.
Q: Can you provide free samples?
A: Sorry, Free samples are not available for the custom parts. But after you place the order, samples cost would be return. Which is "FREE" in some way.
Q: I have a drawing, can you produce?
A: First, please send your drawing to our sales representative, they will forward all the information to our engineer and evaluate our capacity, a detail proposal will be reply with 24 hours.
Q: I have a PTFE sample but don't have drawing, what can i do?
A: In this situation, firstly please send us some photos of your sample, we will evaluate. If our factory can produce, then secondly we will ask sample from you, the Draftsman will make drawings according your sample, PS: Make sure your sample is new and unused.
Q: What are you usual terms of payment?
A: Payment welcome T/T, West Union and Paypal.
Q: What is your available tolerance?
A: Generally, tolerance is based on the design and material, we are now able to reach +/-0.001(inch) for certain parts.
Q: What is your lead time?
A: 7-15 days for normal order, we can achieve 1 week delivery for urgently order.
Q: What document will be offer along with the goods?
A: Document will be offer based on your requirement, like inspection report, packing list, material certification, date sheet, MSDS, COC and so on.
Q: What guarantee do you offer?
A: Life-long technology support, and 60 days return policy(Should make sure all the parts are new and unused).
Q: Who will offer the after-sales service?
A: Your sales representative will in charge of after-sales service, plz contact them if you have any questions.